BeePro Universal Programmer

Quantity Order:

Origin:

China

Payment Method:

Telegraphic Transfer (T/T)

BeePro Universal Programmer
skype is amanda924fung

31728 supported devices by 2.38 version of SW ( 10. May. 2007)
extremely fast programming, one of the fastest programmers in this category. Programs 16-Mbit Flash memory less than 18 seconds
48-pins powerful pindrivers, no adapter required for any DIL devices
connector forin-circuit programming ( ISP)
dual connection to PC: USB or parallel ( printer) port
USB 2.0/ 1.1 compatible interface
alternatively high-speedIEEE 1284 ( ECP/ EPP) printer-port ( LPT) interface
comfortable and easy to use control program, Windows 95/ 98/ Me/ NT/ 2000/ XP/ 2003/ XPx64 compatible
Multiprogramming possible by attaching more programmers to one PC
approved by CE laboratory to meet CE requirements
warranty - 3 years
First member of new USB-compatible generation of Windows 95/ 98/ ME/ NT/ 2000/ XP/ 2003/ XP64 based ELNEC universal programmers built to meet the strong demand of the developers community for the fast and reliable universal programmer.
Supports all kinds of types and silicon technologies of today and tomorrow programmable devices without family-specific module. You have freedom to choose the optimal device for your design. Using built-in in-circuit serial programming ( ISP) connector, the programmer is able to program ISP capable chips in circuit.
BeeProg isn` t only a programmer, but also a tester of TTL/ CMOS logic ICs and memories. Furthermore, it allows generation of user-definable test pattern sequences.
Provides very competitive price coupled with excellent hardware design for reliable programming. Probably best " value for money" programmer in this class.
Very fast programming due to high-speed FPGA driven hardware and execution of time-critical routines inside of the programmer. At least fast than competitors in this category, for many chips much faster than most competitors. As a result, when used in production this one-socket-programmer waits for an operator, and not the other way round.
BeeProg interfaces with the IBM PC 486 compatible or higher, portable or desktop personal computers through USB ( 2.0/ 1.1) port or any standard parallel ( printer) port. Programmer also supports IEEE1284 ( ECP/ EPP) high-speed parallel port. Support of both USB/ LPT port connection gives you the choice to connect the BeeProg programmer to any PC, from latest notebook to older desktop without USB port.

Specifications:

Base unit, DACs
USB 2.0 port
FPGA based IEEE 1284 slave printer port, up to 1MB/ s transfer rate
on-board intelligence: powerful microprocessor and FPGA based state machine
three D/ A converters for VCCP, VPP1, and VPP2, controllable rise and fall time
VCCP range 0..8V/ 1A
VPP1, VPP2 range 0..26V/ 1A
autocalibration
selftest capability
protection against surge and ESD on power supply input, parallel port connection
ZIF socket, pindriver
48-pin DIL ZIF ( Zero Insertion Force) socket accepts both 300/ 600 mil devices up to 48-pin
pindrivers: 48 universal
VCCP/ VPP1/ VPP2 can be connected to each pin
perfect ground for each pin
FPGA based TTL driver provides H, L, CLK, pull-up, pull-down on all pindriver pins
analog pindriver output level selectable from 1.8 V up to 26V
current limitation, overcurrent shutdown, power failure shutdown
ESD protection on each pin of socket ( IEC1000-4-2: 15kV air, 8kV contact)
continuity test: each pin is tested before every programming operation
ISP connector

10-pin male type with missinsertion lock
5 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level H selectable from 1.8V up to 5V to handle all ( low-voltage including) devices.
1x VCCP voltage ( range 2V..7V/ 100mA) , can be applied to pins 1, 3
programmed chip voltage ( VCCP) with both source/ sink capability and voltage sense
1x VPP voltage ( range 2V..25V/ 50mA) , can be applied to pins 2, 3, 4, 6, 8, 10

Recommend to your friends